Toa HB-1 Manual de usuario

OPERATING INSTRUCTIONSSUB-WOOFER SYSTEM HB-1Please follow the instructions in this manual to obtain optimum results from this unit.We also recommend t

108. CROSSOVER CONNECTIONS WITH A FULL-RANGE SPEAKER 8.1. Recommended Filters for the HB-1 • Because the HB-1's enclosure construction is designe

119. CAUTIONS CONCERNING HIGH-IMPEDANCE APPLICATIONS To avoid damaging the HB-1 speaker in high-impedance applications (with the MT-S0601 matchingtran

10. SPECIFICATIONSEnclosure Type Acoustic Super Woofer system Power Handling Continuous program: 240 W (40 – 200 Hz)Continuous pink noise: 80 W (40 –

2When Installing the Unit• Install the unit only in a location that can structurally support the weight of the unit and the mounting bracket.Doing oth

32. GENERAL DESCRIPTIONThe TOA HB-1 is a high-power, wall/ceiling-mounted sub-woofer system employing a 20 cm speaker unit.Although small in size, the

46. INSTALLATION6.1. ContentsCheck to be sure that the following components are available in a complete set before installation:Speaker ... 1Stud ho

5Step 2. Loosen the screws of the hook clips (4 places)attached to the mounting bracket and leaveeach screw sticking out approximately 2 mm.Step 3. In

6Step 5. Install the supplied speaker fixing screws (4pieces with M4x30 plain and spring washers) inthe mounting bracket so that they are leftsticking

7Step 8. Reinsert the detachable input connector into the unit's socket, then fit the unit in the mounting bracket.Step 9. Rotate the lock tabs (

86.3. Suspending the Unit in the Ceiling When suspending the HB-1 speaker in the ceiling, removethe lock tabs and suspend the unit using bolts or wire

97. MATCHING TRANSFORMER INSTALLATION An optional MT-S0601 matching transformer can be installed in the HB-1 speaker. Step 1. Remove the 13 enclosure